2 Types Dental Composite Resin Heater Material Soften Warme 40℃ 45℃ 50℃ / 40-70℃

Description

Model 1: Product Description( temperatue  40℃ 45℃ 50℃ ):
Resin heater is designed for heating composite resin material to improve the flow of its adhesive properties.
At the same time it can also be used to heat adhesive when used manual equipment, filter cover.
1- Light filter;
2- Heating plate;
3- Heating main body;
4- Resin base;
5- Temperature indicator;
6- Temperature selection and the on / off button;
7- DC power.
Operation:
1. DC Plug the power adapter into the external socket to connect the power;
2. Green light is shining after the power supply the default temperature of 40 ℃;
3. One key operation, three temperature precise adjustable:
4. When the green light is standing, the temperature is 40 ℃;
5. Once again the key shows the yellow light shining, and the representative continues to heat until the yellow light is often bright and the temperature is 45 ℃;
6. Once again the key shows the red light shining, and the representative continues to heat until the red light is often bright and the temperature is 50℃
Temperature Light color Heating Reached the preset temperature
40℃ Green Shiny Green LED Green LED often bright
45℃ Yellow Shiny Yellow LED Yellow LED often bright
50℃ Red Shiny Red LED Red LED often bright
Notice:
Quick flash means heating up, when the temperature reaches 50℃, then press the key it can be cooled to 40℃;
The light slowly flashes when cooling down.
Cleaning and disinfection
All the parts can be disinfectant cloth to wipe clean. Don't take any part in any liquid immersion disinfection.
Not 135℃ sterilization.
Technical parameters:
Power adapter
Input : 100-240V AC 50/60Hz
Output : 12V 3A
Model 2 :Product Description( temperatue  40-70℃  ):
1.1   Heater designed for heating composite resin material,improve the flow of its adhesive properties;At the same time it can also be used to heat adhesive when used manual equipment.
Heater use the precision circuit control module to heat,control the temperature tolerance within 1 degree,According to your choice of material and it can set any integer  temperatue within 40-70℃
1.2  Some materials and recommended temperatue
No.
Material
Recommended temperatue(℃)
1
Resin(for filling)
39
2
Resin(for bonding)
55
3
Branscan
38
4
Agar film
Melting 99；Insulation 60
5
Sodium hypochlorite
60
Operation:
2.1  After plug the power supply,the digital tube is always on ” -- ℃ ”
2.2  After plug the power supply,single press “ ON/OFF/SET ”
Heater goes into the heating state according to the set temperatue at previous power-off
.It automatically stops heating after reaching preset temperatue.
2.3  After plug the power supply,single press “ + ” or “ - ” into the setup mode.Press  “ + ” can increase the preset temperatue.Press  “ - ” can decrease the preset temperatue.After setting,single press “ ON/OFF/SET ” into the heating state.It automatically stops heating after reaching preset temperatue.
Notice:
In the setting mode,long press the “+”or “-” to quickly increase or decrease the preset temperatue,any integer within the preset temperatue 40-70 can be selected.
Technical parameter:
3.1  Power adapter：
Input：AC100-240V 50/60Hz
Output：DC15V2A
3.2  Heating temperatue range:40℃-70℃，±1℃
Package List:
1 * AR Heater
1 * Plug
1 * User Manual